FEATURES:
It is a styrene acrylic emulsion based, matte coating paint consisting of imizadol isomeric ketotizal and s-triazine derivative, containing mold and fungi poisons. Lime has excellent inhalation properties like whitewash. It does not crack and does not flake off.
USED PLACES:
Used on plaster, concrete, wood, lime and whitewashed surfaces.
APPLICATION PREPARATIONS:
Excellent results are obtained by using Plas'coll Antibacterial Primer Paint as the first coat on lime-washed sections, particle board surfaces and surfaces of doubtful durability in new buildings.
PRODUCT PREPARATION:
The product is prepared for application by diluting the first layer with 4/3 and the second layer with 2/1 water.
METHOD OF APPLICATION:
After the product is thinned, it is applied in two layers with 1-2 hour intervals depending on the ambient temperature and humidity.
MATTERS TO BE CONSIDERED:
The temperature during the application should not be less than zero degrees and should not be worked under very hot sun.
DRYING TIME:
15 minutes to first dry Final dry. 1 hour
CONSUMPTION:
It occupies at least 10 m2 /lt area on a single floor.
- Plas'coll Patterned Spray Paint
1-FEATURES:
a) Contents: It is a PVA homopolymer based, plastic, decorative wall coating paint.
Plas'coll Patterned Spray Paint adheres well to the surfaces it is applied to; It is extremely robust and useful. It does not crack or spill. It has the ability to breathe. It is acoustic, resistant to impact and friction. Since it creates a decorative and thick layer when applied to surfaces, it has the feature of losing more insulation and surface defects than other paints.
b) Areas of Use: It is applied on flat plaster, exposed concrete, ytong chipboard, brick, elka, wood, sheet metal and all kinds of painted, whitewashed and plastered surfaces in a wide variety of areas such as residences and workplaces.
c) Colors: The main color is white, and it can be produced in special colors.
d) Packaging: Plas'coll Patterned Spray Paint decorative spray paints are offered for sale in 30 kg packages.
2- BEFORE APPLICATION:
a) Application Preparations: The desired combination of Plas'coll Plastic paint color is applied to the surface to be sprayed. After 24 hours of drying, the main product Plas'coll Patterned Spray Paint is applied.
b) Surface Preparation: The surface to be applied must be free of all kinds of oil, dirt, etc. roughness should be cleaned with the help of sandpaper.
c) Product Preparation: The material is prepared for use by diluting it with water at a rate of 10-20% according to the air temperature so that it reaches the consistency of a special pistol. The thinned material is lowered into the airbrush tank in tins.
d) Preparations for Application Tools: Plas'coll Patterned Spray Paint is applied with a special airbrush and especially a special gun and roller.
3- APPLICATION:
a) Application Method(s): The product, which is ready for use, is applied in different color combinations, with thin, medium and thick patterns.
b) Considerations: During the application, the temperature should not be below zero and should not be worked under very hot sun.
4-AFTER APPLICATION:
a) Drying Time: First drying: 15 minutes
Final drying: 1 hour
b) Storage of the Product: Plas'coll Patterned Spray Paint should be stored in places above zero degrees.
c) Storage of Application Tools: At the end of the work, application tools and equipment should be thoroughly washed with water and cleaned.
5-CONSUMPTION (CONSUMPTION):
Plas'coll Patterned Spray Paint decorative spray paints are consumed 0.500-1.200 kg/m2, depending on the type of surface and the desired relief thickness.
- Plas'coll Eco Plastic
1-FEATURES:
a) Content (Ingredients): It is a matte interior paint based on PVA Homopolymer Emulsion.
b) Uses: It is used on plaster, concrete, wood, lime and whitewashed surfaces.
c) Colors: White and 15 matte colors.
d) Packaging: Plas'coll Eco Plastik was launched in 3.5 kg, 10 kg and 25 kg packages.
2- BEFORE APPLICATION:
a) Application Preparations: Excellent results are obtained by using “Plas'coll Plastic Primer Paint” as the first coat on new buildings, lime-washed sections, particle board surfaces and surfaces whose durability is doubted.
b) Floor (surface) Preparation: Swelling places from the whitewashed walls with sandpaper or scraper; on wooden surfaces, cracks and crevices are filled with putty and sanded to make the surface ready for application.
c) Product Preparation: The product is prepared for application by diluting the first layer with 4/3 and the second layer with 2/1 water.
d) Application Tools Preparations: It is applied with a brush or roller.
3- APPLICATION:
a) Application Method(s): After the product is thinned, it is applied in two layers with 1-2 hour intervals depending on the ambient temperature and humidity.
b) Considerations: The temperature limit during the application should not be less than zero degrees and should not be worked under very hot sun.
4-AFTER APPLICATION:
a) Drying Time: First drying: 15 minutes
Final drying: 1 hour
b) Coloring Time: The material should be stored in places below zero degrees and the paint box should be kept upright.
c) Storage of the Product: Plas'coll Eco Plastic should be stored in places above zero degrees.
d) Storage of Application Tools: At the end of the work, the tools should be washed with water and cleaned.
5-CONSUMPTION (CONSUMPTION):
It occupies at least 10 m2/lt area in a single layer.
TS 5808
- Plas'coll Plastic Paint
1-FEATURES:
a) Ingredients: PVA Hopolymer Emulsion based, matte interior paint.
b) Application Areas: It is used on plaster, concrete, all kinds of prefabricated building elements and particle board types after proper surface preparation. It is resistant to friction and washing and has the ability to breathe.
c) Colors: White and 15 matte colors.
d) Packaging: Plas'coll Plastik has been put on the market in 3.5 kg, 10 kg and 20 kg packages.
2- BEFORE APPLICATION:
a) Application Preparations: Excellent results are obtained by using “Plas'coll Plastic Primer Paint” as the first coat on new buildings, lime-washed sections, particle board surfaces and surfaces whose durability is doubted.
b) Floor (surface) Preparation: The surfaces on which Plas'coll Plastic Paint will be applied must be free of dirt, oil, dust and all kinds of loose, swollen surfaces and must be at a sufficient moisture level.
c) Preparation of the Product: The product is made ready for use by diluting the first layer with 4/3 and the second layer with 2/1 water.
d) Application Tools Preparations: It is applied with brush and roller.
3- APPLICATION:
a) Application Method (or Forms): After the product is thinned, it is applied in two layers at 1-2 hour intervals depending on the ambient temperature and humidity.
b) Considerations: The temperature limit during the application should not be less than zero degrees and should not be worked under very hot sun.
4-AFTER APPLICATION:
a) Drying Time: First drying: 15 minutes
Final drying: 1 hour
b) Storage of the Product: The material should be stored in places below zero degrees and the paint box should be kept upright.
c) Storage of Application Tools: At the end of the work, the application tools and equipment should be washed and cleaned with water.
5-CONSUMPTION (CONSUMPTION):
It occupies at least 10 m2/lt area in a single layer.
TS 5808
- Plas'coll Ceiling Plastic
a) Content (Ingredients): It is a PVA Hopolymer Emulsion based, matte ceiling coating paint. Lime has excellent inhalation properties like whitewash. It does not crack and does not flake off.
b) Uses: It is used on plaster, concrete, wood, lime and whitewashed surfaces.
c) Packaging: Plas'coll Ceiling Plastic has been put on the market in 25 kg packages.
2- BEFORE APPLICATION:
a) Application Preparations: Excellent results are obtained by using “Plas'coll Plastic Primer Paint” as the first coat on new buildings, lime-washed sections, particle board surfaces and surfaces whose durability is doubted.
b) Floor (surface) Preparation: Swelling areas from the whitewashed walls with sandpaper or scraper; on wooden surfaces, cracks and crevices are filled with putty and sanded to make the surface ready for application.
c) Product Preparation: The product is prepared for application by diluting the first layer with 4/3 and the second layer with 2/1 water.
d) Application Tools Preparations: It is applied with a brush or roller.
3- APPLICATION:
a) Application Method(s): After the product is thinned, it is applied in two layers with 1-2 hour intervals depending on the ambient temperature and humidity.
b) Considerations: The temperature limit during the application should not be less than zero degrees and should not be worked under very hot sun.
4-AFTER APPLICATION:
a) Drying Time: First drying: 15 minutes
Final drying: 1 hour
b) Storage of the Product: The material should be stored in places below zero degrees.
c) Storage of Application Tools: At the end of the work, the tools should be washed with water and cleaned.
5-CONSUMPTION (CONSUMPTION):
It occupies at least 10 m2/lt area in a single layer.
TS5808