It is a hydraulic type arm barrier. It works with hydraulic pump and hydro-motor. It is the strongest Arm barrier type and is very useful. There is hardly any need for spare parts. It offers trouble-free service at the entrances where it has been established for many years. The opening and closing speed of the barrier arm can be adjusted by hydraulic valves. Maximum opening and closing speed. 1-3 sec. ' is It is generally preferred in highway toll booths, entrances and exits with heavy flow, and guardhouses. Thanks to the hydraulic power it produces, it lifts a 40*80*3 mm steel profile arm instead of a light aluminum arm. For this reason, the arm does not break in collisions and there is no damage to the barrier. The case is completely 3 mm. is steel. The initial investment cost is a bit expensive compared to other barrier systems. But in the future, it is a barrier that does not want service. In short, it is hassle-free. Hydraulic arm barrier safety precautions; Barrier under arm pneumatic wick (arm rises back up during contact at vehicle or pedestrian entrance), Photocell security sensor, Loop metal mass detector, Flashing lamp, Red green 110 cm. LED traffic light, Optional collision alarm kit, Power LED lighting on the arm, Hard-wired star-stop-emergency stop button application, 2 channel remote control receiver card, 2 x 2 channel remote control buttons, Hydraulic release valve, Manual power cut use hand control lever for hydro-automatic arm barrier technical Specifications; Ability to work with 220/380 volt ac voltage, 1.1 kW motor power, Max. Load switch with 10 amp fuse, 60 kilos arm carrying capacity, under arm fence preventing pedestrian or animal passage, possibility of carrying cage wire, Complete steel case 3 mm. Possibility of electrostatic paint or stainless steel cr-ni production Our hydraulic automatic arm barrier systems are 100% domestic madoors system company production. We have a 2-year uninterrupted warranty and a 10-year spare part guarantee. All of our products have CE , TSE certificates .