This pump is suitable for working with many types of liquids at low pressures.

Properties

• It can be used with water and solvent based products. Membrane and all products in contact with liquid are made of Teflon.
• It can be used for topcoat spraying with automatic or manual guns, electrostatic systems, HVLP or conventional units.
• Very high current rate despite its small size and light weight.
• Faster circulation, lower air usage and less noise.
• Easy operation and easy cleaning.
• Coating interface size: 3/4inch
• max. Air pressure : 7bar
• Material Inlet and Outlet: 3/4” NPT
• Air Inlet and Outlet: 1/4” NPT
• Minimum starting pressure: Planar valve: 1.6bar / Low pressure valve: 0.5bar
• max. Material Flow: 14.88GPM ( 56LPM )
• max. Air Consumption: 380NL/Min
• max. Grain Diameter: 3 mm
• Suction: 6.4m (wet) , 3.7M (dry)
• Diaphragm Diameter: 142mm